1990's Mid-Atlantic NHAP aerials now available

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,831
3,011
Ben's Branch, Stephen Creek
A new map is now online featuring complete New Jersey 1980's aerials along with the tri-state area, including Philadelphia, New York City and Long Island.

menu.png


https://boydsmaps.com/#15.00/40.548115/-75.210790/nhap80/0.00/0.00

Screen Shot 2024-11-21 at 8.24.33 AM.png


These aerials were acquired by the USGS National High Altitude Photography (NHAP) program which was the predecessor to the 1990's National Aerial Photography Program (NAPP). After some searching, I found complete coverage of New York on an obscure USDA site. Could not find any 1980's imagery for Delaware, Connecticut, Massachussets or Rhode Island so those areas are blank on this map. I considered substituting 1990's imagery, but but rejected that idea since it gets too confusing.

PASDA has complete Pennsylvania NHAP coverage (over 2000 plates) but the catch is, they are not georeferenced. So, I dug through a huge number of overlapping plates and ended up with 87 that could provide just enough coverage of Eastern PA to square off the "Jersey S-curve" and provide a straight Western boundary for the map. This turned into a big project - I used the 1990's NAPP aerials as a reference but was surprised by how much things changed over 10 years. In the 80's, the mountains of Pennsylvania were a pretty wild place with few distinctive features standing out. By the 90's, there were a lot of new homes, roads and lakes. But I identified a total of 5 matching points on each photographic plate, one near each corner and another near the center, which took about 20 minutes each. This provides basic georeferencing but the accuracy is poor, in the range of +/- 20 meters probably. I think it would take 20 control points and around one hour for each plate to do a more acceptable job, but that just wasn't gonna happen.

The original plates are pretty cool, just from an historical/artistic point of view. Here's an example of one that has been georeferenced, the blue rectangle is the only portion that was actually used and there's still considerable overlap between plates.

nhap_plate.png


Some of the plates show a row of gauges (or should I say "gages"? :D ) along the top edge. That's an altimeter on the left, bubble level in the middle and clock on the right, for example.

gauges.png


I suspect that the main issue with georeferencing is the size of these images, which cover a full USGS 7.5 minute 24k quadrangle. The 1990's NAPP aerials only cover one quarter of a quad and were photographed from an altitude 30,000 feet above mean terrain. The 1980's NHAP aerials were shot at 40,000 feet above mean terrain. The additional distance and coverage area could magnify any errors in the imagery. For example, if the camera wasn't pointing straight down, the image would be "keystoned" and even a slight error of less than one degree would be substantial at 40,000 feet.

I should point out, there are no changes at all to the Southern New Jersey portion of this map, so if you're only interested in the Pines there's nothing new here.

Anyway... the new map is now available. Any links to the old 1980's pines aerials will give you an alert and re-direct you to the new map. You will probably have to manually change your favorites if they included the old 1980 aerials. And you will no doubt experience browser cache issues if you have recently used the old map. As usual, clearing your cache should solve this. If you're using a computer, the followiing article may help.


A phone can be more stubborn, as there isn't a way to do this. If you've installed the web app on your home screen, you might need to delete it and re-install if you're having problems, sorry.
 

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,831
3,011
Ben's Branch, Stephen Creek
I think there were little gauges ("gages" :D ) built right into the camera, with little lenses for each that projected an image on the same big 9-inch film plate. Of course, in our digital world today, this would all be metadata that was captured to a file.

Here's an example of a full plate with 4 "windows" at the top. The one on the right just has some scribbled writing that (I assume) identified the mission. Seems like a compass would have been more helpful there. Not all of the plates have these, maybe only some cameras had this feature?

top.png


Some appear to have been shot "upside down" (guess that would all be relative though). Notice there's an exposure counter (?) in a little window at the top left that says 1-3 8 on the plate above. That counter is at the bottom right on the plate below. I think the other info at the top of both plates (with the date, image number, etc) was added later when they processed the film on the ground.

bottom.png
 
  • Like
Reactions: bobpbx
Top