Welcome to lidar.boydsmaps.com!

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek
Another block of 20 tiles is now online, just below the last row, starting around Tuckerton Road and going East to the Bombing Range.

Hawkins Bridge Campsite
https://lidar.boydsmaps.com/#x102y051/ortho/-176/408/-592/-177/3/-106/275/431/1686/100/1.5/3d

hawkins.jpg



Oswego River
https://lidar.boydsmaps.com/#x107y052/shader/0/1368/0/0/0/0/1686/431/-1020/82/2.5/2d

oswego.jpg


NJPB LIDAR map of the same location, for comparison:
https://maps.njpinebarrens.com/#lat=39.702862&lng=-74.501851&z=16&type=lidar&gpx=


Here's an updated coverage map

coverage.jpg
 
Last edited:
  • Like
Reactions: bobpbx

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek
Last edited:

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek
Just uploaded 20 new tiles in the area between Bulltown and Route 563. Here's an updated site coverage map.

coverage.jpg



Bulltown
https://lidar.boydsmaps.com/#x099y058/ortho/-94/504/882/52/-7/415/1961/333/-314/100/1.5/3d

bulltown.jpg



Here's a topo of the area around Bull Creek and the Batona Trail
https://lidar.boydsmaps.com/#x101y058/topo/0/1300/0/0/0/0/-1333/412/-1686/82/1.5/2d

topo.jpg



The shaded terrain reveals a feature that doesn't really show on the topo or my old LIDAR maps. Notice the meandering narrow ridge in the northern half of this image - looks like it was squeezed out of a toothpaste tube. If you look at the elevation while you drag the map around, you'll see that it's only about 8 feet higher than the surrounding terrain. Would love to hear what @Spung-Man can tell us about this. :)

https://lidar.boydsmaps.com/#x101y058/shader/0/1300/0/0/0/0/-1333/412/-1686/82/1.5/2d

bullCreek.jpg


Here's the NJPB LIDAR map for comparison
https://maps.njpinebarrens.com/#lat=39.6476&lng=-74.573562&z=16&type=lidar&gpx=

And LIDAR in the Pines HD
https://online.boydsmaps.com/#16/39.6476/-74.5736/lidarHD

It is visible on these maps, but not nearly as obvious. The macro-shading of my new LIDAR maps uses the full "rainbow" of colors for each tile, accentuating elevation changes.
 
Last edited:

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek

Boyd

Administrator
Staff member
Site Administrator
Jul 31, 2004
9,828
3,009
Ben's Branch, Stephen Creek
Here's two dozen more tiles that cover from Hampton Furnace to Hampton Gate.

The mountains of Hampton Gate
https://lidar.boydsmaps.com/#x092y041/ortho/566/463/-695/116/7/-256/-1569/706/1725/100/2.5/3d

hamptonGate.jpg



The hill that is seen in the foreground is an interesting feature. Looks like a big pile of dirt, but I assume it's a natural feature(?)
https://lidar.boydsmaps.com/#x092y041/shader/417/148/-396/210/7/-542/-1216/706/-2000/73/2/3d

pile.jpg




Hampton Furnace
https://lidar.boydsmaps.com/#x092y045/topo/0/1440/0/0/0/0/1333/392/-1333/100/2.5/2d

The dark topo really shows how the parcels don't align with the true position of the roads. There are many examples like this in Wharton, and I assume it's because the parcel map was created from USGS 24k topo maps, which aren't very accurate.

topo.jpg



Lots of detail to digest here when you zoom in. :)
https://lidar.boydsmaps.com/#x092y045/shader/0/1440/0/0/0/0/1333/392/-1333/100/2.5/2d

hamptonFurnace.jpg


The NJPB LIDAR map for comparison. Another example where you'd be hard-pressed to realize it's the same location.
https://maps.njpinebarrens.com/#lat=39.767538&lng=-74.680967&z=16&type=lidar&gpx=
 
Last edited:
Top